news

Industry News

Current location: Index > news > Industry News

Recommended NewsRecommend

R

Contact UsContact Us

C

Company Name: Hebei Situo Building Materials Co., Ltd

Phone: 15731143000

Postal Code: 050031

Email: 1665089017@qq.com

Website: www.syjgm.cn

Address of Gaocheng factory: No.1 Road, Jiumen Industrial Park, Gaocheng District


Post maintenance methods for aluminum magnesium manganese metal tiles and a plan to extend the service life of the roof

2026-08-13 09:05:35
77169

Aluminum magnesium manganese metal tileWith its excellent corrosion resistance, ductility, and styling advantages, it is widely used in cultural and tourism buildings, villa roofs, public venues, sloping roof renovations, and other projects. Aluminum magnesium manganese alloy itself has a natural passivation protective layer, but the roof is exposed to sunlight, rain, sandstorms, fallen leaves, and pollutants for a long time. Reasonable regular maintenance can reduce the occurrence of diseases, maintain the integrity of the roof appearance, and reduce maintenance costs. This article shares the daily inspection, cleaning, disease treatment, and protection points of aluminum magnesium manganese metal tiles, providing reference for roof operation and maintenance.

1、 Regular inspection: Pre check various hidden dangers

Inspection is the foundation of maintenance work for aluminum magnesium manganese metal tiles, and it is recommended to develop inspection cycles based on environmental conditions. Ordinary urban environments can be inspected every six months; It is recommended to shorten the frequency to once every three months for industrial areas, coastal salt spray areas, and areas with a lot of fallen leaves in forests and mountains.

1. Inspection of roof panel surface

Carefully observe whether the tile surface coating has local peeling, detachment, scratches, or color differences; Pay attention to whether there are areas of water accumulation on the board surface, as long-term water accumulation can accelerate coating aging. Pay attention to key nodes such as tile ribs, lap joints, ridges, eaves, and gutters.

2. Overlapping and fastener inspection

Check whether the sealing material at the overlapping position of the board has cracks, shrinkage, or delamination; Are various fixed supports and screws loose. Aluminum magnesium manganese sheet has thermal expansion and contraction characteristics, and loose fasteners can easily cause larger overlapping gaps, leading to water leakage hazards.

3. Inspection of auxiliary components

Synchronize the inspection of supporting components such as gutters, rainwater pipes, flashing boards, expansion joints, sealing strips, waterproof cushion layers, etc. Blockage of gutters and deformation of water overflow are common causes of roof leakage.

Inspection should be carried out on sunny days as much as possible. It is forbidden to walk on the tile surface with hard soled shoes directly to avoid scratching the surface coating. If necessary, install anti slip pads to reduce direct friction between the sole and coating.

2、 Standard cleaning method for aluminum magnesium manganese metal tiles

The accumulation of fallen leaves, mud, moss, dust, bird droppings and other impurities on the roof can retain moisture for a long time, creating a humid environment locally and accelerating coating aging. Regular cleaning is necessary.

1. Conventional dust and sediment cleaning

Prioritize using low-pressure clean water to rinse from top to bottom, and gently clean with a soft brush. The water flow pressure should not be too high, as high-pressure water guns can easily damage the surface coating when charged directly at close range. The cleaning sequence should follow the direction from the ridge to the eaves to avoid the accumulation of dirt in the overlapping gaps.

2. Stubborn stain treatment

For bird droppings, local oil stains, and stubborn pollutants, neutral specialized metal roof cleaning agents are selected. Before use, it is recommended to conduct a small-scale test in a concealed location on the roof to confirm that the coating will not be damaged before large-scale construction. Do not use strong acid or strong alkali cleaning agents, as these materials can damage the coating and aluminum magnesium manganese passivation protective film.

3. Vegetation clearing

Cool and humid areas are prone to the growth of moss and algae. After cleaning, suitable algae suppressants for metal roofs can be used to inhibit vegetation growth again. The cleared debris should be promptly transferred from the gutter to avoid blocking the drainage channel.

3、 Common roof disease treatment plan

1. Slight surface scratches and coating wear

Shallow surface scratches, substrate not exposed, generally do not require special treatment. If there are many scratches or local coating damage, or if the metal substrate is exposed, it is necessary to repair it in a timely manner. Clean up the dust and oil stains in the damaged area, use the same color matching repair paint to evenly apply, block air and water vapor, and prevent substrate oxidation.

2. Aging and cracking of sealant

When the sealant at the lap joint and water overflow position hardens, cracks, or falls off, completely remove the old adhesive layer, clean the impurities inside the joint, and wait for the base surface to dry before reapplying weather resistant neutral sealant. Construction needs to avoid rainy and low-temperature weather to ensure the effectiveness of adhesive bonding.

3. Blockage of gutters and risk of corrosion

Regularly clear the gutters and rainwater outlets to ensure smooth drainage. Long term accumulation of silt and water inside the gutter not only affects drainage but also increases the probability of corrosion. Coastal and chemical areas can regularly clean the pollutants on the inner walls of gutters to reduce the continuous adhesion of salt spray and corrosive media.

4. Slight deformation of the board

Small deformations caused by temperature stress and external force trampling are not recommended for forced tapping correction as they may damage the coating. Continuously observe the deformation position. If the gap continues to widen, the waterproof performance can be optimized by adjusting the seal and adding edge closing components. Severely deformed plates should be replaced locally according to the site conditions.

4、 Taboos to avoid in daily use

1. Do not act recklesslyAluminum magnesium manganese tileStacking building materials and miscellaneous items on the roof, and long-term pressure from heavy objects can easily cause deformation of the boards and block drainage lines;

2. During construction around the roof, ensure proper protection of the tile surface to prevent welding sparks, cement slurry, and paint from directly falling onto the metal tile surface, as welding slag can easily burn the coating;

3. It is not recommended to directly install steel structure brackets, photovoltaic brackets, and other components on aluminum magnesium manganese tiles. Multiple waterproof treatments must be completed for newly added openings;

4. Do not directly contact aluminum magnesium manganese sheets with different metal materials for a long time to avoid electrochemical corrosion. Isolation gaskets can be added between components.

5、 Suggestions for differentiated maintenance in different environments

1. Environment of ordinary inland towns: mainly inspected every six months and cleaned annually to remove fallen leaves and dust;

2. Coastal and coastal areas: The air contains salt, and the deposition of salt crystals can accelerate aging. It is recommended to increase cleaning frequency and reduce long-term salt deposition;

3. Surrounding the industrial park: There are pollutants such as exhaust gas and dust. Regularly wash the board surface and pay attention to the integrity of the coating;

4. Forests and densely vegetated areas: Clear fallen leaves in a timely manner in autumn to prevent them from accumulating and storing water, and to prevent the growth of moss.

Conclusion

Aluminum magnesium manganese metal tileHaving good environmental adaptability, but not completely maintenance free. The service life of the entire roof system is closely related to the quality of the panels themselves and the subsequent maintenance and operation. Establishing a regular inspection mechanism, standardizing cleaning, timely repairing minor damages, and ensuring smooth drainage can effectively reduce problems such as water seepage, coating aging, and local oxidation, stabilize the appearance of the roof, and reduce large-scale maintenance investment in the later stage.

石家庄树脂瓦,采光板批发,铝镁锰金属瓦生产厂家



Global sub stations
COPYRIGHT © Hebei Situo Building Materials Co., Ltd ALL RIGHTS RESERVED Record number:|冀ICP备14000229号-7 Mainly engaged in Shijiazhuang Wholesale Resin Tile , FRP Lighting Panel , Metal Tile Factory , Welcome to call for consultation!
Main business Saudi Arabia Uzbekistan Pakistan Bhutan Philippines Korea Myanmar Brazil Peru morocco